Digital Product Passport
Product Information
3D Filament ADDNITE P15R on 750 gram spool
Sustainable 3D materials from Lostboyslab, made in Sweden. Strong hybrid compounds aimed for tough conditions and end-user parts. Prints with any FDM-FFF 3D printer with an open material solution.
Product Data
Product code
MATL0248-0750
Method of manufacturing
Place of manufacturing
Malmö
Country of manufacturing
Sweden
Manufacturing info URL
https://www.lostboyslab.shop/collections/addnite-3d-filaments/products/3d-filament-addnite-p15r
Spare Parts
Spare Part Information
The spool can be sent back to us for REUSE, we will deduct 1 USD for each spool
Addnite P15R 3D filament
These settings are a good steer for printing with this material across a variety of devices. Please be aware that optimum settings may vary between printers. The use of standard PETG settings works fine, here are some more details.. Nozzle Temperature 235 C degrees +/- 10C Bed Temperature 85-90 C degrees Fan Speed, Disable fan for the first 3 layers and then run 30-50% Retraction Speed 35-45 mm/s Retraction Distance 1 mm
Spool reel 750 gram 200 series recycled
51% Natural Green Bio Fibers 49% Post consumer polymer
Material
Material Information
Material Addnite P15R, the Spool is recycled Durasense
Main Material
Material name
Addnite P15R
Material brand
Lostboyslab
Material code
MATL0248-0750
Color code
NCS 9000
Country of origin
Netherlands and Sweden
Material data sheet
Material safety sheet
Secondary Material
Material name
Durasense biofiber and PP
Material brand
StoraEnso
Material code
MATL0187
Color code
NCS
Country of origin
Sweden
Support
Support Information
3D printing setting: Standard PETG settings works fine, here are some more details.. Nozzle Temperature 235 C degrees +/- 10C Bed Temperature 85-90 C degrees Fan Speed, Disable fan for the first 3 layers and then run 30-50% Retraction Speed 35-45 mm/s Retraction Distance 1 mm
Recycling
Recycling Information
The spool can be sent back to us for REUSE, we will deduct 1 USD for each spool
Bioderived
No
Biodegradable
No
Recyclable
Yes
Recycled
Yes
Material origin type
Recycled from trays and cable glands
Material chemical name
Polyethylene terephthalate glycol & EPDM rubber
Resin Code
Manufacturing
Manufacturer Information
3D print farm Alpha Zero, South Coast of Sweden
The Lostboyslab Alpha Zero operates more than 140 FDM, FFF, SLS, SLA and FGF 3D printers to enable high volume production with additive manufacturing. We offer a wide range of materials from Onyx, continuous carbon fibre, recycled PLA and PETG and new development of hybrid materials for more sustainable 3D filaments. Lostboyslab is a circular design studio and software developer of the lifecycle product data platform whatt.io supporting digital spare parts and material traceability.
Name
Lostboyslab 3D print farm The Factory
Country
Sweden
City
Malmö
[email protected]
Website
https://lostboyslab.com/
whatt.io AI